1 Super Stopper II® Roller Bearing anti-reverse for instant hooksetting power.
Lightweight Graphite frame, rotor and sideplate.
Cold Forged Aluminum spool for increased strength and
durability.
Cold Forged Aluminum spare spool.
Fluidrive II® polished, oversized drive gear for increased
efficiency.
Line
Retrieve
Line
Capacity
Max
Ball
Roller
Gear
Weight
Model
Per
Crank
(in)
(# Test/Yds)
Drag
Bearings
Bearings
Ratio
(oz)
SE750FB
22
2/240, 4/120,
6/95
7
2
1
4.7:1
6.9
SE1500FB
24
4/170, 6/130,
8/90
9
3
1
5.2:1
9.6
SE2500FB
26
6/200, 8/140,
10/120
11
3
1
5.2:1
9.8
SE4000FB
28
8/240, 10/200,
12/160
17
3
1
5.1:1
12.7
SE6000FB
30
10/310, 12/240,
14/210
19.5
3
1
4.4:1
21.2
SE8000FB
33
12/320, 14/270,
16/220
19.5
3
1
4.4:1
20.2
02225505683
SHIMANO SE1500FB SEDONA
49.99
02225505684
SHIMANO SE2500FB SEDONA
49.99
02225505685
SHIMANO SE4000FB SEDONA
49.99
02225505743
SHIMANO SE6000FB SEDONA 14#/210yds 5.1:1 3BB,1RB
69.99
02225505744
SHIMANO SE8000FB SEDONA
69.99
Sedona Featured
Highlights
• Graphite Frame
• Graphite Sideplate
• Graphite Rotor
• Cold Forged Aluminum Spool provides increased strength and durability.
• Spare Cold Forged Aluminum Spool (except model 750)
• S-Concept (only on model 750) represents Shimano’s initial philosophy on
which many of our spinning reels have been designed. The three basic ideas that are inherent
in the S-Concept are Smooth, Silent and Strong.
• Slow Oscillation (only on model 750) Lays the line in a parallel pattern
for excellent castability and control.
• Maintenance Port (only on model 750) A sealed plug that can be removed
using a screwdriver to easily lubricate the drivetrain without disassembling the reel.
• S-Arm Cam (only on model 750) A protruding surface on the bail arm keeps
slack line in contact with the line roller to reduce the chance of tangles and line
cuts.
• Fluidrive II uses the successes of Fluidrive, but also uses a polishing
process to increase tooth contact for increased efficiency.
• A-RB (Anti-Rust Bearings) are specially treated stainless steel ball
bearings that are at
least 10 times more corrosion resistant than standard stainless steel
ball bearings.
• Super Stopper II is a one-way roller bearing that eliminates backplay for
solid hooksets, yet can be turned on or off to allow back-reeling.
• Ported Handle Shank (only on model 750, otherwise standard) reduces the
overall weight of the reel.
• Dyna-Balance Similar to balancing a tire, we use counter-balancing
techniques in the rotor to eliminate wobble during the retrieve.
• Power Roller II is an oversized line roller that reduces twist from
casting and retrieving and is enhanced with a tapered area on the support to help line get onto the
roller quicker.
• Floating Shaft By using a bearing or bushing, friction is reduced between
the pinion gear and spool shaft for increased smoothness and durability.
.jpg)
