Penn Torque Reel

  The Penn Torque Series Star-Drag Reels offers super-high drag capabilities with fewer parts than a traditional reels. Crank up the drag and the machined side plate absorbs any load you can dish out, all without causing any binding of the main and pinion gear. Gears, pinions, and handle maintain perfect alignment no matter how heavy the load. Penn TRQ Reels are Made in USA!

  The Penn Torque Star Drag Reels Feature:
• 3 Position Clicker - Heavy, light or off  • Line Capacity Rings - Divides the spool into thirds so you know how much line is on the reel.  • Live Spindle - The spool spins independently of the spindle and pinion gear  • Lightweight and Strong Machined and anodized Aluminum body and side plates  • Light weight forged spool  • Stainless steel main and pinion gear  • Versa-Drag with HT-100 washers  • 7 sealed stainless steel ball bearings, Plus an Instant anti-reveres bearing with a silent back up ratchet  • Three position adjustable clicker  • Switchblade Harness Lugs (on 40 size only) • Optional Aftermarket Versa-Gear (See Below)     Take a look at the Penn Torque Spinning Reel

     - Penn Torque Black -                     In Stock Now

The "NEW" Penn Torque TRQ Star Drag reel model sizes are 12, 15, 25, 30 & 40. All models are shipped from the factory with only the 6.0:1 gear ratios. Some product boxes do not have the correct gear ratio printed on the box so Penn has pasted a gear ratio notice as necessary to the inside of the box lid. Optional Versa-Gear sets will be available for purchase separately which are for the aftermarket installation of lower 5.4:1 and 4.8:1 ratios.

Torque Star Drag Versa-Gear (Optional Aftermarket Modification)
  All Torque Star Drag reels come standard with a 6:1 gear ratio for rapid line retrieve. However you may find the need for a lower gear ratio in certain fishing situations, for example: bottom fishing where power is more important than speed. For these situations Penn offers the optional Versa-Gear™ Sets which allows you to purchase ($49.99 each) and install either a 5.4:1 or 4.8:1 ratio.