Flex Coat, the industry standard for rod building epoxy glues and finishes. Flex Coat is proud to introduce our new
Ultra V's unsurpassed UV protection and improved chemical stability results in unequaled clarity and brightness, while maintaining the
highest durability and flexibility properties of any finish on the market
today. Professionals will appreciate the extended pot life and improved
self-leveling properties of these finishes.
Available in High Build and Lite
formulations. Note that the High Build Formula is thicker, designed
for a great finish in just one coat. On the other hand, the Lite
Formula is designed for much lighter, thinner coats such as on small
light rods or situations where multiple coats are desired to build up an
even thick coat.
FLEX COAT-F4Y-WRAPPING FINISH - 4oz-HIGH BUILD FORMULA
FLEX COAT-F4YL-WRAPPING FINISH - 4oz-LITE FORMULA
Flex Coat Color Preserver - This strong, non-yellowing color preserver
provides great penetration and color retention. The easy to use, non-toxic
formula cleans up quickly with water. Apply 2 or 3 coats on regular
thread. Apply one coat on N.C.P. thread if sealer is desired.
FLEX COAT-C1F-COLOR PRESERVER - 1oz
Flex Coat Rod Wrapping Finish Loaded Syringe Kit - Large 12 cc syringes come filled and ready to use. Enough finish to
complete 4 average rods. Kit includes a 12 cc syringe loaded with part "A"
resin, a 12 cc syringe loaded with part "B" hardener, 4 finishing brushes,
4 mixing cups, and 4 mixing sticks.
FLEX COAT-F1K-LOADED SYRINGE - 24cc-BRUSHES, CUPS AND STICKS
FLEX COAT-F2P-WRAP FINISH KIT - 2oz-WITH SYRINGES
Flex Coat Rod Builder Epoxy Glue - This is a
professional, clear, high strength, waterproof bonding material. Perfect
for gluing reel seats, ferrules, gimbals, handles, grips, roller tip tops,
cork rings, butt caps and general repair. Pot life of 20 minutes...full
strength in 2 hours. Instructions Included.
FLEX COAT-G4-EPOXY GLUE - 4oz
FLEX COAT-G8-EPOXY GLUE - 8oz
GUDEBROD-444/1B-FERRULE CEMENT - SHOP STICK
GUDEBROD-822B-ROD-VARNISH - 1oz BOTTLE
GUDEBROD-840B-ROD FINISH - 1oz BOTTLE Out of
Sorry the Gudebrod 840B Finish is out of stock and hard to find. Hopefully it
will be available in the future. Please see below, a possible substitute
although not the same: Perma-Gloss by U-40 (1oz or 4oz bottle)
Zap - a - Gap Superglue
is a cryanoacrylate adhesive (a.k.a. superglue) that is very
popular for many uses. It works with plastic or metal (as well
as wood, rubber, leather, etc.), can be used under or over paint, is
thicker than generic superglues (drips less and fills gaps better), and
dries quickly. Zap-a-gap is avialable in two different formulas. CA+
is the thick formula and CA is the thin formula.
PACER-PT/08-ZAP A GAP CA+ - 1oz - THICK, GAP FILLING ADHESIVE
PACER-PT04-ZAP A GAP CA+ - 1/4oz - THICK, GAP FILLING ADHESIVE
PACER-PT10-ZAP A GAP CA - 1/4oz - SUPER THIN INSTANT ADHESIVE
U-40 offers high quality products. The U-40 Cork
Seal is thin alcohol based
product that is applied after a cork ring grip has been shaped. It seals
and toughens the surface of cork handles. The U-40 Color Lock Sealer/Preserver
is a water based product (can be easily thinned) that locks in thread color and
locks the threads to the rod. It retains superb luster. The U-40 Perma
Gloss Urethane Finish is the ultimate non-bulky one-part urethane finish for those
requiring a water-clear, non-yellowing finish that will outlast the rod
itself in durability. It is great for fly rods, light spin rods, pack rods
and in all cases where a large bulky buildup on the rod windings is not
wanted. Perma Gloss is also a fantastic finish for refinishing blanks and
coating wood reel seats. Must be used in a well ventilated area.
U40-40300-CORK SEAL - 2oz-SEALANT FOR CORK HANDLES
U40-U401-PERMA GLOSS - 1oz-URETHANE ROD FINISH - U-40 Perma Gloss Urethane Rod Finish
U40-U402-COLOR LOCK 2 - 1oz - U-40 Color Lock Sealer/Preserver